To obtain the IP address of your local computer, you can use various methods depending on the operating system you are using. Below are common methods for different operating systems:
1. Windows System
In the Windows operating system, you can find the IP address using the Command Prompt. Follow these steps:
- Open Command Prompt: Type
cmdorCommand Promptin the search bar and press Enter. - In the Command Prompt window, type the
ipconfigcommand and press Enter. - Look for the
IPv4 Addresssection in the output; this displays your Local Area Network (LAN) IP address.
For example, the output might look like this:
shellWireless LAN adapter WLAN: ... IPv4 Address . . . . . . . . . . . . : 192.168.1.2 ...
Here, 192.168.1.2 is your IP address.
2. macOS System
In macOS, you can find the IP address using Terminal. Follow these steps:
- Open Terminal: Type
Terminalin Spotlight search and press Enter. - Type the
ifconfigcommand and press Enter. - Look for the
inetaddress under theen0oren1label; this is typically your IPv4 address.
For example, the output might look like this:
shellen0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500 inet 192.168.1.3 netmask 0xffffff00 broadcast 192.168.1.255 ...
Here, 192.168.1.3 is your IP address.
3. Linux System
In Linux, you can query the IP address using the terminal:
- Open Terminal.
- Type
ip addr showorifconfig(if installed) and press Enter. - Look for the
inetaddress associated with your network interface.
The output might resemble:
shell3: wlp2s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000 link/ether 02:00:00:44:55:66 brd ff:ff:ff:ff:ff:ff inet 192.168.1.4/24 brd 192.168.1.255 scope global dynamic noprefixroute wlp2s0 valid_lft 604447sec preferred_lft 604447sec
Here, 192.168.1.4 is your IP address.
These are common methods to obtain the IP address of your local computer. Choose the method that suits your operating system.